LG S1T1 Page 46 User Manual Download

Page: 46 / 100

You can perform a firmware management of LG Network Storage (upgrade,

initialization, set-up value back-up / restoration)

-9

System set-up

Firmware

1. Upgrade

Click on “Browse” button-

Select the system firmware

downloaded from the prod-

uct site.

After checking the internet connection of the PC, download the system firmware of

LG Network Storage from the product site linked.

- Product site http://www.lg.com

It is a function to upgrade LG Network Storage system and firmware of the DVD drive

by downloading from the product site. Upgrade may be performed in a PC where a

firewall or security is applied.

System firmware upgrade

Once the upgrade is

completed, the system au-

tomatically restarts. The web

connection is automatically

disconnected afterwards,

therefore you need to re-

connect.

Click on “Upgrade”button

Select DVD drive firmware you downloaded from the product site.

After checking the internet connection of the PC, download the DVD drive firmware

installed in LG Network Storage from the product site linked.

- Product site http://www.lg.com

DVD drive firmware upgrade

When the upgrade is completed, it gives you a notice regarding version of the DVD

drive firmware installed.

Install a selected DVD drive firmware.

※

It is recommended to perform a back-up for the stability of the data prior to

Network Storage upgrade. Installation time may take 1 minute ~ several minutes.

When you upgrade the firmware, please stop other actions, and be careful that the

power is not turned off. In addition, warn in advance so that the client user does not

access LG Network Storage during firmware upgrade.

Summary of Contents for S1T1





































































































Search results

Summary of Contents for S1T1

Reviews:

Related manuals for S1T1

Brands by name

Popular brands

LG S1T1, User Manual

Search results

Summary of Contents for S1T1

Reviews:

Related manuals for S1T1

Brands by name

Popular brands