background image

- 1 -

➀ 

Elevation grile

➁ 

Bolts for installation (4 EA, P/No. 3A00255K)

➂ 

Installation manual

➃ 

Remote Controller for lift grill

➄ 

Owners Manual

Main Components of Elevation grile

How to Use Remote Controller

How to Insert Battery

As for operation of Remote Controller, use it by directing the transmitter part of Remote
Controller to the receiver part of front panel directly under front panel.

• Do not drop it down or into water.  Or else there is worry about trouble failure.
• Do not press hard the Remote Controller button with nail (ballpoint pen or other sharp substance).  

Or else there is worry about trouble failure.

• In case when obstacle such as curtain hides the signal reception part of receiver in between the space

interval, Remote Controller operation is infeasible.

• Keep this manual together with main body instruction manual.
• As for cleaning method of filter, refer to main body instruction manual.

Ascend
Descend

Stop

Elevation grille

• Open the Remote Controller rear cover and insert first to the spring side of Remote Controller and then

push to insert the other side of battery.

• Replace electric cells.
• Use 2 AAA batteries.
• Correctly insert while replacing battery with caution of battery receiver part polarity of + or -.

• Don't use old battery or different kinds of battery.
• Make use of warranty period of used battery when replacing battery.
• Remove battery for safety in order to prevent trouble by battery liquid leakage when you are not to use

Remote Controller for a long period.

Elevation grille

Owner's Manual

Summary of Contents for PTEGM0

Page 1: ...signal reception part of receiver in between the space interval Remote Controller operation is infeasible Keep this manual together with main body instruction manual As for cleaning method of filter refer to main body instruction manual Ascend Descend Stop Elevation grille Open the Remote Controller rear cover and insert first to the spring side of Remote Controller and then push to insert the oth...

Page 2: ...with adjacent material and the suction grill fall down Don t pull suction grill Don t draw out suction grill irrationally Or else there is worry that lift grill drive part is damaged and suction grill might drop down Don t place obstacle in lift passage of lift grill When suction grill descends it automatically stops at a certain distance If there is any obstacle in lift passage suction grill migh...

Page 3: ...ter dissolved with neutral detergent 1 Auto leveling function When the grille is tilted while it is operating this function levels the grille in front rear left and right direction 2 Drop distance setting function If drop height is more than 1M this function blocks the grille from falling below a drop height limit set by the user When the grill is falling press the button at the height you want Wh...

Page 4: ...rial inside Has air filter been correctly installed Correctly install air filter after removing causative material if any Suction grill is slant by 1 2 cm It is because there occurred a little aberration in winding of right and left wires It is not abnormal condition Suction grill stops halfway And it does not go down any more Has it not been placed on a desk table But it is not abnormal It automa...

Reviews: