39
206-4350
Ez Download Utility (Cont.)
(Continued from previous page)
10. When you are ready to continue, use the arrow keys on the Installer Remote to select
DOWNLOAD
, and then press the Wheel (
OK
) button.
Download/update progress will be displayed on the screen. Do NOT remove the USB device
while downloads/updates are in progress. When the Ez Download process is complete, an
overview of the results will briefly be displayed and then, the TV will reboot.
11. Remove the USB memory device, and verify that the appropriate configuration/download(s)/
update(s) is/are resident on the TV.
Note:
If you updated the TV configuration with a Clone/Configuration file, upon restart, the TV
tunes according to the Start Channel setting in the Installer Menu. If a Start Channel is specified,
the TV will tune to that channel, though in the case of FTG Mode configuration, a channel banner
will only be displayed if the Start Channel is included in the FTG Channel Map (depending on your
selection in step 9, the channel banner will display either the Start Channel’s logical channel
number or physical RF channel number). Otherwise, the TV will either return to the last channel
tuned (TV in Pass-through Mode) or tune to the first channel in the FTG Channel Map (TV in
FTG Mode). In the latter case, remember that the channels in the FTG Channel Map are always
arranged in logical order, regardless of your selection in step 9.