manualshive.com logo in svg

LG Pro:Centric 24LT572M, Setup Manual, Page: 70 / 101

Share
Download
LG Pro:Centric 24LT572M Setup Manual Download Page 70

70

206-4342

Reference: FTG Mode via EBL (Local Configuration)

Note: FTG Device Configuration Application version 5.5.8 is the latest and final release of 

this software. There will be no future releases. However, the application may still be used 

for FTG Mode via EBL configuration, as described below. 
If you are using an FMA head end device for remote management and you wish to include 

FTG Installer Menu settings for these models in an FMA Configuration (.fma) file, you will 

need to “Read” FTG Installer Menu settings from a Master 24/28LT572M and/or 32/43LT572M 

TV (as applicable) that is already configured for FTG Mode via EBL. That is, you will need 

to perform all steps of the procedure below before you can add an FTG Installer Menu  

profile for this model to the FMA Configuration List in the FMA Configuration Utility. See 

the 

Free-To-Guest (FTG) Device Configuration Application

 

User Guide 

for further information 

on the FMA Configuration Utility.

The following steps outline local FTG configuration of individual TV EBLs using a direct PC-to-TV (EBL) 

connection. Refer to the 

Free-To-Guest (FTG) Device Configuration Application

 

User Guide 

for further 

information. 

FTG Device Configuration Application software is available online at: 

 

www.lg.com/us/business/display-solutions/ftg.

Note: 

If the TV CPU is already in FTG Mode, you cannot use this procedure to make changes to the FTG 

Channel Map and FTG Installer Menu settings. Refer to FTG Mode information on pages 7 to 9 for further 

details. If the preceding condition applies, but you wish to switch the TV to FTG Mode via EBL, see  

Reference section, “Restoring Factory Defaults on the TV(s),” for further information before proceeding.

1.

  Install (if necessary) and launch the FTG Device Configuration Application 

on the PC that will be used 

to configure the EBL.

2. 

Build an FTG Channel Map using the FTG Channel Map Editor in the FTG Channel Map Configuration 

Utility (or, if applicable, open an existing FTG Configuration [.rml] file).

Note: 

Up to 141 logical channels can be defined in the FTG Channel Map

. 

3.  Connect the PC to the TV-LINK CFG jack on the TV’s rear jack panel using a USB-to-TTL serial cable 

(TTL-232R-5V-AJ). If necessary, install the device driver on the PC.

(Continued on next page)

24/28LT572M Jack Panel 

32/43LT572M Jack Panel

Laptop

PC

Laptop

PC

OPTICAL

DIGITAL

AUDIO OUT

GAME CONTROL 

/MPI

ANTENNA/

CABLE IN

TV-LINK CFG

UPDATE

TV-LINK 

CFG

SPEAKER OUT

LINE OUT

SERVICE

ONLY

OPTICAL

AUDIO OUT

UPDATE

RESET UPDATE

GAME CONTROL 

/MPI

TV-LINK CFG

Use to connect PC to TV (EBL) for 

local FTG Mode via EBL configuration.

USB-to-TTL Serial Cable

  

Required for local FTG Mode 

via EBL configuration. 

Laptop

PC

Laptop

PC

OPTICAL

DIGITAL

AUDIO OUT

GAME CONTROL 

/MPI

ANTENNA/

CABLE IN

TV-LINK CFG

UPDATE

TV-LINK 

CFG

SPEAKER OUT

LINE OUT

SERVICE

ONLY

OPTICAL

AUDIO OUT

UPDATE

RESET UPDATE

GAME CONTROL 

/MPI

TV-LINK CFG

Use to connect PC to TV (EBL) for 

local FTG Mode via EBL configuration.

USB-to-TTL Serial Cable

  

Required for local FTG Mode 

via EBL configuration. 

Summary of Contents for Pro:Centric 24LT572M






































































































Reviews:

No comments