manualshive.com logo in svg

LG Pro:Centric 24LT572M, Setup Manual, Page: 48 / 101

Share
Download
LG Pro:Centric 24LT572M Setup Manual Download Page 48

48

206-4342

Custom Master TV Setup (Cont.)

Custom Master TV Setup Procedure

1.  Turn ON the TV. 

The next step depends on whether the First Use Wizard appears on the 

screen when you turn ON the TV: 
•  If the wizard is displayed, the TV is in the required factory default state. 

To continue with this procedure, exit the wizard, and then go to step 2. 

Note:

 If desired, you may also use the First Use Wizard / Express 

Script to create an Express Script TV Setup for cloning purposes. 

See “Express Script” on pages 22 to 30 for further information. Note 

that TV setup menu customization via the Express Script is limited to 

Channel Menu options.

•  If the wizard is not displayed, restore the TV to a factory default  

condition before continuing with this procedure. See Reference  

section, “Restoring Factory Defaults on the TV(s),” as necessary,  

for further information.

2.  Set Installer Menu items.

This step provides specific instruction only on the Installer Menu items 

that should be set on a Master TV. Refer to pages 35 to 46 for detailed 

information on all Installer Menu items.
a) Use the Installer Remote to access the Installer Menu (see  

“Accessing the Installer Menu” on page 35 for further information).  

b) Set Installer Menu item 

003 BAND/AFC

, as appropriate.

•  Broadcast: Set to 0.

•  HRC: Set to 2.

•  Cable: Set to 1 (default).

•  IRC: Set to 3. 

c) Set Installer Menu item 

027 HOSPITAL MODE

, as appropriate, to 

select the speaker configuration.

Note:

 This setting also determines whether channel banks are  

applied. See item 027 description for further information. The TV 

Zoning feature is only available when item 027 is set to 0 (i.e.,  

Hospital Mode is disabled).

d) Set any other Installer Menu items that affect your TV programming 

network to the required configuration. For example, enable/

disable 

Aux inputs, set a Start Channel, etc.

e) After you have adjusted all Installer Menu item settings as required, 

press 

OK

 once on the Installer Remote to save your changes; then, 

press 

OK

 again to exit the menu.

(Continued on next page)

Typical Installer Menu

003    BAND/AFC                001

Adjust the values for these  

Installer Menu items, as required.

027    HOSPITAL MODE     254

PTC  INSTALLER  MENU

xxLT572M  

CPU

 

-

 

CTV

000   INSTALLER SEQ       000

UPN  000-000-000-000 

ASIC  D279 

PTC  V#.##.### 

CPU  V#.##.##.##

Summary of Contents for Pro:Centric 24LT572M






































































































Reviews:

No comments