manualshive.com logo in svg

LG Pro:Centric 24LT572M, Setup Manual, Page: 31 / 101

Share
Download
LG Pro:Centric 24LT572M Setup Manual Download Page 31

31

206-4342

Ez Download Utility

(Continued on next page)

The Ez Download utility, available from the TV Manager, enables you 

to select multiple files at one 

time from the files loaded on a USB memory device. You may use this utility to download 

any one 

or all of the following to a TV: 
• 

One Clone or FTG Configuration (.tlx) file

•  One TV CPU software update 
•  One PTC software update
•  One boot logo (splash screen) image 

Before You Begin

•  Ensure the USB device has been formatted with FAT format.
• 

Software update and boot logo image files must be stored in a folder named “LG_DTV” in the 

root directory of the USB memory device. Clone/Configuration (.tlx) files should simply be stored 

in the root directory of the USB device.

• 

If you have initiated the EZ-Manager Wizard, you can use the wizard’s “USB Configuration” 

 

option to access the Ez Download utility, if desired (see “TV Configuration Options” and/or “USB 

Configuration” on pages 

14 and 19, respectively, as necessary).

•  If the TV is currently in Pass-through Mode and you intend to use the TV Zoning feature for 

location-specific configuration purposes, make sure to set the appropriate TV Zone # in the TV 

when directed to do so in the procedure below.

Note:

 The TV Zoning feature is only available when Installer Menu item 027 HOSPITAL MODE 

is set to 0 (i.e., Hospital Mode is disabled). See item 027 description on page 41 for further 

information. 

• 

When creating files to be downloaded, avoid using special characters (?, &, @, etc.) in filenames. 

•  Refer to “Custom Master TV Setup” on pages 47 to 49 for information on creating a Clone (.tlx) 

file, and/or 

refer to “Creating an FTG Configuration File” on pages 

56 to 58 for information on 

creating an FTG Configuration (.tlx) file for FTG Mode via CPU configuration.

 

•  See Reference section, “Downloading a Boot Logo Image using a USB Memory Device,” for 

boot logo image guidelines.

•  See Reference section, “Updating TV/PTC Software using a USB Memory Device,” for further 

information on software updates.

Caution: Do not unplug the TV power cord or remove the USB memory device  

during a data download, as doing so may cause the TV to malfunction or harm the 

USB device, respectively. 

Accessing and Using the Ez Download Utility

1.  If it is not ON already, turn ON the TV.
2.  The next step depends on whether the First Use Wizard appears on the screen when you turn 

ON the TV: 

Summary of Contents for Pro:Centric 24LT572M






































































































Reviews:

No comments