manualshive.com logo in svg

LG Pro:Centric 24LT572M, Setup Manual, Page: 12 / 101

Share
Download
LG Pro:Centric 24LT572M Setup Manual Download Page 12

12

206-4342

The LG First Use Wizard, comprising EZ-Manager Wizard and Express Script configuration 

options, will appear on the screen each time the TV is turned ON, until one of its configuration 

methods has been completed or the wizard is exited. Use the Installer Remote to make selections 

and complete each step.
•  The primary purpose of the EZ-Manager Wizard is to guide you through the process (automated 

or manual) of configuring the essential Installer Menu items for Pro:Centric 

operation. However, 

while intended primarily for Pro:Centric-related configuration, the EZ-Manager Wizard also 

offers Zoning options. LT572M TVs support the (Lodging) TV Zoning feature, which enables 

location-specific configurations. See Reference section, “Using the TV Zoning Feature,” for 

further information. The EZ-Manager Wizard enables you to set the TV Zone # in the TV as part  

of the configuration process.

The EZ-Manager Wizard also enables you to access the TV Manager / USB download options  

as part of the configuration process, if desired, to perform USB configuration and/or update 

functions. See “EZ-Manager Wizard” on pages 14 to 21 for further information.

•  The Express Script guides you th

rough the process of configuring the TV for FTG Mode via CPU

 

operation with Hospital Mode features. This includes setting up the pillow speaker, as required, 

as well as setting up channel banks (up to four) for tiered channel programming. The Express 

Script also enables you to configure the Pro:Centric settings on the TV. 

See “Express Script” on 

pages 22 to 30 for further information.

Caution: Do NOT unplug the TV power cord or remove the antenna cable or, if  

applicable, the LAN cable during the configuration process, as doing so will interrupt 

the current step and may corrupt the configuration data. 
Note: If you do not intend to complete the Express Script, but you wish to enable  

Hospital Mode (pillow speaker functionality and also channel banks), you must set  

Installer Menu item 027 HOSPITAL MODE appropriately. See the “Installer Menu”  

section of this document for further information. 

Before You Begin

•  If you plan to create a customized Master TV Setup using the procedure described on pages 47 

to 49

, be sure to exit the LG First Use Wizard in order to avoid setup conflicts or setting modes

 

that may cause unintended behavior or restrict the custom setup procedure. See also “Initiate 

Configuration or Exit the LG First Use Wizard” below.

•  If it has been completed or exited and therefore does not display, the First Use Wizard can be  

reactivated; however, this requires that you restore the TV to a factory default condition. See 

Reference section, “Restoring Factory Defaults on the TV(s),” for further information.

Initiate Configuration or Exit the First Use Wizard

The Welcome screen provides a brief introduction to the First Use Wizard.

Note:

 Once you proceed with one of the configuration options, it is not possible to return to the 

First Use Wizard Welcome screen; however, if you simply wish to exit the EZ-Manager Wizard or 

Express Script (depending on your selection from the First Use Wizard Welcome screen), you can 

do so by selecting the “Exit” button from the subsequent screen(s).

First Use Wizard

(Continued on next page)

Summary of Contents for Pro:Centric 24LT572M






































































































Reviews:

No comments