126
CONNECTING DEVICES
HDMI to DVI Connection
Using an HDMI to DVI cable,
connect the projector's
port to the DVI OUT
port.
To output audio, use an audio
cable for connection. You can also
use the
.
Press the
INPUT
button on the
remote control to select
HDMI
. You
can connect with any HDMI input
port.
DVI OUT
AUDIO OUT
Optional
Extras
Not
provided
•
It is recommended to use
an HDMI connection for the
best image quality.
•
Depending on the graphics
card, DOS mode video may
not work if a HDMI to DVI
Cable is in use.
•
In PC mode, there may be
noise associated with the
resolution, vertical pattern,
contrast, or brightness. If
noise is present, change
the PC output to another
resolution, change the
refresh rate to another rate
or adjust the brightness and
contrast on the
PICTURE
menu until the picture is
clear.
•
The synchronization input
form for Horizontal and
Vertical frequencies is
separate.
•
Depending on the graphics
card, some resolution
settings may not allow the
image to be positioned on
the screen properly.
•
If you are using DVI out from
a PC, you have to connect
analog audio separately.
•
When using the HDMI/DVI
cable, Single link only is
supported.
NOTE
