LG NORTEL 6812, User Manual

Page: 28 / 32

LIP Phone 6812
User Guide
5.7. Lock Outgoing Call
The LIP Phone can be configured to allow outgoing calls only if a password is entered. When enabled,
the LCD screen will display the password request as shown and the password must be entered prior to
connecting an outgoing call.
Enter Password:
****
[
»
] [Clr ] [ OK ]
To activate this feature, the LCD password must be set, consult your system administrator to set the LCD
password.
To enable/disable the Lock Outgoing Call feature:
o
Press the button.
o
Dial 3, or move the cursor to
3.Phone Settings
using the
[Prev]-[Next]]
softkeys and press the
[ OK ]
softkey.
o
Dial 9, or move cursor to
9.Lock Outgoing Call
using the
[Prev]-[Next]
softkeys and press the
[ OK ]
softkey.
o
Press the
[Yes ]
softkey to enable the Lock Outgoing
Call, or press the
[ No ]
softkey to disable the Lock
Outgoing Call. Press the
[ OK ]
softkey to save the
entry.
Lock Outgoing Call
Current value is ‘Yes’.
[Yes ] [ No ] [ OK ]
o
Move to another parameter with the navigation buttons
and continue the session or press the button to exit the configuration session.
5.8. Enabling Speed Number Dialing
The LIP Phone 6812 includes a Phone Book that supports up to 100 entries. Each Phone Book record
includes a two-digit Speed number, see Speed Number Dialing . When enabled, dialing the Speed
number (00~99) sends the contact number or user id from the associated Phone Book record.
To enable/disable Speed number operation:
o
Press the button.
o
Dial 3, or move the cursor to
3.Phone Settings
using the
[Prev]-[Next]
softkeys and press the
[ OK ]
softkey.
o
Dial 10, or move cursor to
[ OK ]
using the
[Prev]-[Next]
softkeys and press the
[ OK ]
softkey.
o
Press the
[Yes ]
softkey to enable Speed number, or
press the
[ No ]
softkey to disable Speed number.
Press the
[ OK ]
softkey to save the entry.
Speed Number
Current value is ‘Yes’.
[Yes ] [ No ] [ OK ]
o
Move to another parameter with the navigation buttons
and continue the session or press the button
to exit the configuration session.
23 Oct. 07