MS- E10 User Guide
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp. 23
Step 2: As needed, click to include or omit steps. For a new MS-E10 device, you typically accept all default selections.
Commissioning steps include:
•
Request or install software licenses — Preselected for any new MS-E10
device.
•
Set enabled runtime profiles — Preselected and read-only for any new unit.
•
Install a station from the local computer — Recommended. Optionally, you can station(s) at a later time.
•
Install lexicons to support additional languages — Option to install file-based lexicon sets (alternative to lexicon
modules). Typically you leave this unselected since lexicon modules are required in N4.
•
Install/upgrade modules — (always preselected, whenever wizard is run). To select the software modules, and
optionally any lexicon modules.
•
Install/upgrade core software from distribution files — Preselected and read-only for any new unit.
•
Sync with my local system date and time — Preselected in most cases (new MS-E10
device for example, where
controller time may greatly differ from actual time).
•
Configure TCP/IP network settings — Recommended.
•
Remove platform default user account — Preselected and read-only for a new unit. You cannot commission a unit with
the factory default platform user.
•
Configure additional platform daemon users — Recommended option if additional platform admin user accounts are
required, with unique user names and passwords (all have full equal privileges).
Step 3 Click the Next button to continue.
Installing or updating licenses
At the License step, install one or more license files in a new MS-E10 device. You typically select the option to get and install
licenses from the licensing server.
Prerequisites:
•
A minimum of one license file is always needed. Typically, other license files are not needed unless you are using third-
party module(s). In this case, you can also install those license files during this same commissioning step, either
automatically, or by selecting to install from files.
Figure 10: Installing or updating licenses