Operating
61
Oper
ating
3
Auto power down
This unit will turn itself off to save electric
consumption when the main unit is not connected to
an external device and is not used for 20 minutes.
It will also turn off after six hours if the Main unit is
connected to a device using portable input.
When network is connected, the speaker switches to
the network standby mode. Then the LED indicator
on the unit becomes dimmed in white.
If network is disconnected, the speaker switches to
the standby mode. Then the LED indicator on the unit
turns red.
AUTO POWER On/Off
This unit automatically turns on and off by an input
source : Optical.
When you turn on your TV or an external device
connected to this unit, this unit recognizes the input
signal and selects the optical function. You can hear
the sound from your device.
This function turns on or off each time you press
AUTO POWER
.
y
After the unit is turned on by AUTO POWER
function, it will be automatically turned off if
there is no signal for a certain period of time
from the TV connected by LG Sound Sync
(Optical).
y
After the unit is turned on by AUTO POWER
function, it will be automatically turned off if
there is no signal for a certain period of time
from the external device.
y
If you turned off the unit directly, it cannot
be turned on automatically by AUTO POWER
function. However the unit can be turned on
by AUTO POWER function when optical signal
comes in after 5 seconds of no signal.
y
Depending on the connected device, this
function may not operate.
y
If you want to use AUTO POWER, SIMPLINK
must be turned off. It takes for about 30
seconds to switch on or off SIMPLINK.
y
You can set the
AUTO POWER
function only
when this unit is turned on.
y
If you turn off(Red LED) this unit in
the network disconnected status, you
cannot AUTO POWER On by LG Sound
Sync(Wireless).
,
Note
