![LG MP500-F Series Easy Setup Manual Download Page 1](http://html.mh-extra.com/html/lg/mp500-f-series/mp500-f-series_easy-setup-manual_215210001.webp)
1
ENGLISH
Please read these safety precautions carefully before using the product.
■ Make sure to connect the power cable a grounded outlet.
- You may be electrocuted or injured.
■ Use the rated voltage only.
- The product can be damaged, or you may be electrocuted.
■ During a thunder or lightning storm, unplug the power cable or signal cable.
- You may be electrocuted or a fire can break out.
■ Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered
with dust, dry the power plug completely or wipe dust off.
- You may be electrocuted due to excess moisture.
■ Do not insert a conductor (like a metal chopstick) into one end of the power cable while
the other end is connected to the input terminal on the wall. Additionally, do not touch the
power cable right after plugging into the wall input terminal.
- You may be electrocuted.
■ The appliance coupler is used as the disconnect device.
■ Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries
according to the instructions.
Safety Precautions
Digital Signage Media Player
MP500-F***
Easy Setup Guide
Please read this guide carefully before using this product and keep it for future reference.
Please record the model number and serial number of the product on this guide. You will
need to provide this information (if applicable) when you require service.
P/NO. : MFL68930901(1501-REV00)
Printed in Korea
Installation Environment of MP500-F*** Media Player
Leave at least 10 cm of space at each side of the player from an obstacle when installing
the player to ensure sufficient ventilation.
< Install Media Player Attached to Monitor >
< Install Media Player >
10 cm
10 cm
10 cm
10 cm
*MFL68930901*
10 cm
10 cm
10 cm
10 cm
Summary of Contents for MP500-F Series
