ENGLISH
10
•
How to use the ferrite core (Depending on
model)
-
Use the ferrite core to reduce the
electromagnetic interference in the power
cord. Wind the power cord on the ferrite
core once.
[Wall side]
[TV side]
10 cm (+ / -2 cm)
CAUTION
•
Do not use any unapproved items to ensure
the safety and product life span.
•
Any damage or injuries caused by using
unapproved items are not covered by the
warranty.
•
Some models have a thin film attached on
to the screen and this must not be removed.
•
When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
•
Make sure that the screws are inserted
correctly and fastened securely. (If they are
not fastened securely enough, the TV may
tilt forward after being installed.) Do not
use too much force and over tighten the
screws; otherwise screw may be damaged
and not tighten correctly.
Lifting and moving
the TV
Please note the following advice to prevent the
TV from being scratched or damaged and for
safe transportation regardless of its type and
size.
•
It is recommended to move the TV in
the box or packing material that the TV
originally came in.
•
Before moving or lifting the TV, disconnect
the power cord and all cables.
•
When holding the TV, the screen should
face away from you to avoid damage.
•
Hold the top and bottom of the TV
frame firmly. Make sure not to hold the
transparent part, speaker, or speaker grill
area.
•
When transporting a large TV, there should
be at least 2 people.
•
When transporting the TV by hand, hold the
TV as shown in the following illustration.