12
Specifications
General
Power supply
200-240 V, 50/60 Hz
Power consumption
MCD104:
30 W
MCD204:
50 W
Net Weight
MCD104:
5 kg
MCD204:
5.27 kg
External dimensions (WxHxD) (272 x 338 x 358) mm
Operating temperature
5
o
C to 35
o
C
Operating humidity
5 % to 85 %
Tuner
FM Tuning Range
87.5 to 108.0 MHz or
87.50 to 108.00 MHz
AM Tuning Range (optional)
522 to 1620 kHz or 520 to 1710 kHz
Amplifier
Output Power
MCD104:
100 W
MCD204:
200 W
T.H.D
0.50 %
Frequency Response
45 Hz to 20 kHz
Signal-to-noise ratio
70 dB
CD
Frequency response
45 Hz to 20 kHz
Signal-to-noise ratio
70 dB
Dynamic range
70 dB
Cassette
F.F/REW Time
120 sec (C-60)
Frequency Response
250 to 8000 Hz
Signal to Noise Ratio
40 dB
Channel Separation
35 dB (P/B)/ 45 dB (R/P)
Erase Ratio
50 dB (MTT-5511)
Speakers (MCS104F)
Type
2 Way 2 Speaker
Impedance
4
Ω
Input Power
50 W
Max. Input Power
100 W
Net Dimensions (WxHxD)
(220 x 338 x 228) mm
Net Weight (1EA)
2.28 kg
Speakers (MCS204F)
Type
2 Way 2 Speaker
Impedance
4
Ω
Input Power
100 W
Max. Input Power
200 W
Net Dimensions (WxHxD)
(220 x 338 x 243) mm
Net Weight (1EA)
3.06 kg
USB
Version
1.1
BUS power supply
DC 5 V
500 mA
Troubleshooting
Symptom
Cause
Correction
General
No power.
No sound.
The power cord is not plugged in.
Check whether electricity failed.
Check whether you select right function.
Plug in the power cord.
Check the condition by operating other
electronic devices.
Press
FUNCTION
and check the select-
ed function.
CD
The unit does not
start playback.
An unplayable disc is inserted.
The disc is dirty.
Insert a playable disc.
Clean the disc.
RADIO
Radio stations
cannot be tuned in.
The antenna is positioned or connected
poorly.
Connect the antenna securely.
Remote control
The remote control
does not work
properly.
The remote control is too far from the
unit.
There is an obstacle in the path of the
remote control and the unit.
The battery in the remote control is
exhausted.
Operate the remote control within about
23 ft (7 m).
Remove the obstacle.
Replace the battery with new one.
TAPE
Unable to record.
Record protect tabs are removed.
Cover holes on back edge of tape with
tap.
Designs and specifications are subject to change without notice.
MCD104-D0U-ADEULL-ENG 12/18/09 1:08 PM Page 12
