ENG
ENGLISH
26
Forced Initialize
•
This setting will be enabled When CEC mode is set as
TVLink-CEC
.
•
If
Enable
is selected, TV will change its input source to HDMI1 by any HDMI-CEC simulation
from a device.
HTNG Public Display Mode
•
If the following options are selected because of the HTNG command:
* Power On Default,
Start Volume
,
Maximum Volume
,
Minimum Volume
, then the value
for the
HTNG Public Display Mode
changes automatically to
Enable
and, even if the Public
Display Mode is set to
Disable
, the above options are still affected.
•
If you change it to
Disable
, then the values set by the HTNG will be canceled.
Clock Setup
Clock Source
You can select
Off
,
Pro:Centric
,
TV
,
NTP
,
Admin
by pressing
button.
-
NTP
: Clock is synchronized using Network Time Protocol. It’s only enabled when network
cable is connected.
-
Admin
: It’s automatically set to Admin when clock is updated by commercial protocols
like TVLink-HCEC, TVLink-Interactive, or HCAP API.
-
Off
: Clock is synchronized using any available clock source.
-
Pro:Centric
: Clock is synchronized using Pro:Centric server. (Depending upon model)
-
TV
: Clock is synchronized using particular TV program.
Input
-
You can select
Input
according to
Clock Source
.
-
You can select
RF
or
IP
when Clock Source is
Pro:Centric
.
-
You can select TV source when Clock Source is
TV
.
-
Input is set to
None
,
HCAP
,
Protocol
,
HTNG
automatically when Clock Source is
Admin
.
Program/Frequency
(Depending upon model)
-
Sets the Frequency to get the time information when Clock Source is
Pro:Centric
.
-
You can select Program when
Clock Source
is
TV
.
Timezone(City) / Timezone(Custom) / Timezone(Offset)
(Depending upon model)
-
In the case when there is difference between the time information received from the
Teletext and the time of the current area, it can be set up to correct this. The initial value
is 0, and it can be changed in the range of -12Hrs ~ +14Hrs.
(Timezone(Offset)
range is
-12Hrs ~ +12Hrs)
Password Change
To ensure more security, Password can be changed by installers’ own design.
1
Change password by using virtual keyboard.
2
Input the password again for confirmation.
