ENG
ENGLISH
18
Power On Default
Set the channel to display and Volume Level, etc. when turn on power in AC Power On or Stand-by
status.
•
Set to
On
(Work) or
Off
(Do Not Work).
•
When
Power On Default
is set to
Off
, it is not applied to the subordinate Input, Channel, A/V
Setting, Aspect Ratio menu.
•
When Power On Default is set to On, it can set by entering the subordinate menu.
Input
Set whether it is turned on by the set input source or by the last stored input source.
Channel
Select start channel number if Input source’s value is TV.
A/V Setting
If
A/V Setting
is changed from
Off
to
On
, A/V parameters that are set before entering
installation menu are applied whenever turn on power.
Aspect Ratio
The aspect ratio determines the default aspect ratio that the set returns to on power up.
Aux Source Setting
The Auxiliary (Input) Source Setting feature will enable or disable for each external input.
•
Set to
On
(Work) or
Off
(Do Not Work).
•
User cannot disable the current input’s
Aux Source Setting
.
Power Management
The
Power Management
feature will turn off the television receiver if no input control command is
received from either the Local or IR Key within a selected hours.
•
Activity on either of these inputs shall restart the
Power Management
timer and check key time
interval again.
•
This entry can be set to a value which is corresponding to the desired hours (1 to 7).
•
Default value is
Off
(disabled).
Factory Reset
Change all settings to their default values.
