LG LMX28983ST, Training Manual

Page: 1 / 104

TRAINING MANUAL LMX28983ST
LMX28983ST Page 1 FOUR DOOR REFRIGERATOR
IMPORTANT SAFETY NOTICE
The information in this training manual is intended for use by persons possessing an adequate background in
electrical equipment, electronic devices, and mechanical systems. In any attempt to repair a major appliance,
personal injury and property damage can result. The manufacturer or seller maintains no liability for the
interpretation of this information, nor can it assume any liability in conjunction with its use. When servicing this
product, under no circumstances should the original design be modified or altered without permission from LG
Electronics. Unauthorized modifications will not only void the warranty, but may lead to property damage or user
injury. If wires, screws, clips, straps, nuts, or washers used to complete a ground path are removed for service, they
must be returned to their original positions and properly fastened.
CAUTION
To avoid personal injury, disconnect the power before servicing this product. If electrical power is required for
diagnosis or test purposes, disconnect the power immediately after performing the necessary checks. Also be aware
that many household appliances present a weight hazard. At least two people should be involved in the installation
or servicing of such devices. Failure to consider the weight of an appliance could result in physical injury.
ESD NOTICE
Some of the electronic components in appliances are electrostatic discharge (ESD) sensitive. ESD can weaken or
damage the electronics in these appliances in a manner that renders them inoperative or reduces the time until their
next failure. Connect an ESD wrist strap to a ground connection point or unpainted metal in the appliance.
Alternatively, you can touch your finger repeatedly to a ground connection point or unpainted metal in the
appliance. Before removing a replacement part from its package, touch the anti-static bag to a ground connection
point or unpainted metal in the appliance. Handle the electronic control assembly by its edges only. When
repackaging a failed electronic control assembly in an anti-static bag, observe these same precautions.
REGULATORY INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy, and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the
equipment and the receiver; Connect the equipment to an outlet on a different circuit than that to which the
receiver is connected; or consult the dealer or an experienced radio/TV technician for help.
DISCLAIMER
The information in this training manual was accurate at the time of publication. Every effort has been made to
ensure accuracy. Updates, changes, etc. are available via GCSC and LGCSacademy. The information in this manual is
intended for persons with adequate backgrounds in electronics, mechanical, and electronic servicing. The
manufacturer and seller are not to be held responsible for any liability incurred from its use.
COMPLIANCE
The responsible party for this device’s compliance is LG Electronics Alabama, Inc.; P O BOX 240007, Huntsville, AL,
35813.