LG LGC-320W, User Manual

Page: 27 / 31

Your LGC-320/330W telephone is a radio transmitter and
receiver. When it is on, it receives and also sends out radio
frequency (RF) energy. The phone operates in the frequency
range of 824 MHz to 894 MHz. When you use your phone, the
system handling your call controls the power level at which
your phone transmits. The power level can range from 0.006
watts to 0.6 watts.
The design of the LGC-320/330W phone complies with the
most recently updated American National Standards Institute
(ANSI) for safety levels with respect to human exposure to RF
energy. Experts from science, engineering, medicine,
government health agencies, and industry developed the
updated standard. This standard was adopted in March, 1993,
by the U.S. Federal Communications Commission (FCC).
However, if you wish to limit RF exposure further than the
current ANSI Standard, you may choose to control or limit the
duration of your calls and operate your phone in the most
efficient manner.
C
aller I.D.
Radio Frequency (RF) Energy
This feature enables the phone number of the calling person to
be displayed when you receive the call. You should check if
the cellular service carrier provides this feature.
The phone number of the calling person will be displayed on
the LCD screen when the call is received.
The ‘Number is Restricted’ message will be displayed if the
phone blocks displaying the calling person’s phone number. In
addition, the ‘Number is Unavailable’ message will be
displayed in case the Caller I.D. cannot be used. The ‘Missed
Call’ message will be displayed when you fail to receive the
call after power on or fail to answer. Missed call number will
be stored in the call history temporarily and will be displayed
later in case the phone number is not blocked.
In case the phone number is stored in the memory together
with the name, the phone number of the calling person and
name is displayed on the screen before you answer.
Use of Caller I.D.
Stored Phone Numbers with Names