background image

- 16 -

English

Español

OPERATION

Press 

CLEAR/OFF

to cancel the Bake feature at any time.

• The oven has 7 rack positions.

To set the Bake Temperature to 375°F:

1. 

If the oven temperature needs to
be changed to 425°F, press 

BAKE

and 

350°

will show in the display.

2. 

Press 

4, 2, 

and

5.

3. 

Press 

START.

To change the Bake Temperature while cooking
(example changing from 375° to 425°F):

S ET T IN G   B AK E

The 

BAKE

pad controls normal baking. The oven can be

programmed to bake at any temperature from 170°F to
550°F. Default temperature is 350°F (175°C).

BAKING LAYER CAKES

Baking results will be better if baking pans are centered in
the oven as much as possible. If baking with more than one
pan, place the pans so each has at least 1” to 1

1

/

2

” of air space

around it.

If cooking on multiple racks,place the oven racks in positions
B and D (for 2 racks). Place in positions B, D, and F (for 3
racks). Place the cookware as shown in Fig. 1, 2.

BEFORE USING OVEN RACKS

The oven has three racks (2 heavy rack, 1 split rack). The racks
have stops to be placed correctly on the supports, those will stop
before coming completely out.

To remove racks:

1. 

Pull the rack straight out until it stops.

2. 

Lift up the front of the rack and pull it out.

To replace racks.

1. 

Place the end of the rack on the support.

2. 

Tilt the front end up and push the rack in.

1. 

Press 

BAKE

350°

will appear in

the display.

2. 

Press 

3, 7,

and

5. BAKE

will flash.

3. 

Press 

START.

The display will

show 

BAKE

and the changing

temperature starting at 100°F.

Fig.1

Fig.2

Type of Food

Rack Position

Angel food cake, Frozen pies

Bundt or pound cakes

Biscuits, muffins, brownies, cookies,
cupcakes, layer cakes, pies

Casseroles

Turkey, roast, or ham

B

C

D

D

A

1. 

Do not cover a rack with aluminum foil or place foil on the oven
bottom. This will result in poor baking by disturbing heat
circulation and may damage the oven bottom.

2. 

Always arrange oven racks when the oven is cool.

CAUTION

Place food in the oven after preheating if the recipe calls for
it. Preheating is so important for good results when baking
cakes, cookies, pastry, and breads. After the oven has
reached the desired temperature, long beeps will sound 
5 times and oven lamp will flash. This will take
approximately 10~15 minutes.

Important Note:

Oven Racks

Summary of Contents for LFRF0222S



































Reviews: