51
ENGLISH
T RO U B L E S H O OT I N G
BEFORE CALLING FOR SERVICE
(cont')
Problem
Food does not broil
properly
Oven temperature too
hot or too cold
Scratches or
abrasions on cooktop
surface
Metal marks
Brown streaks or
specks
Areas of discoloration
on cooktop.
Oven will not self
clean
“Crackling” or
“popping” sound
Fan noise
Oven racks are
difficult to slide
Convection Fan stops
• Aluminum foil used on the the broiling pan and grid has not been fitted properly and
slit as recommended.
- See the Using the Oven section.
• In some areas the power voltage may be low.
- Preheat the broil element for 5-7 minutes
- See the
Broiling Guide
, page 26.
• Oven Sensor needs to be adjusted.
- See the adjusting your oven Temperature in option section.
• Coarse particles such as salt or sand between cooktop and utensils can cause
scratches.
Be sure cooktop surface and bottoms of utensils are clean before usage. Small
scratches do not affect cooking and will become less visible with time.
• Cleaning materials not recommended for ceramic-glass cooktop have been used.
See
Cleaning The Glass Cooktop
in the MAINTENANCE section, page 44-46.
• Cookware with rough bottom has been used. Use smooth, flat-bottomed cookware.
•
Scraping of metal utensils on cooktop surface. Do not slide metal utensils on
cooktop surface. Use a ceramic-glass cooktop cleaning creme to remove the marks.
See
Cleaning The Glass Cooktop
in the MAINTENANCE section, page 44-46.
• Boilovers are cooked onto surface. Use the blade scraper to remove soil. See
Cleaning The Glass Cooktop
in the MAINTAINANCE section, page 44-46.
• Mineral deposits from water and food. Remove using a ceramic-glass cooktop
cleaning creme. Use cookware with clean, dry bottoms.
• The oven temperature is too high to set a self clean operation.
- Allow the range to cool and reset the controls.
• Oven controls improperly set.
- See the using the self cleaning oven section.
• A self clean cycle cannot be started if the oven lockout feature is active.
• This is the sound of the metal heating and cooling during both the cooking and Self
Clean functions.
- This is normal.
• A convection fan may automatically turn on and off.
- This is normal.
• Apply a small amount of vegetable oil to a paper towel and wipe the edges of the
ovenracks with the paper towel.
• Convection fan stops during a convection bake cycle.
- This is normal and is done to allow for more even heating during the cycle.
This is not a failure of the range and should be considered normal operation.
Possible Causes / Solutions
Summary of Contents for LDE3019ST
Page 54: ...54 MEMO ...