background image

Part 1

SAFETY

4

PARTS PROVIDED

NOTE
•   Read all instructions contained in these installation 

instructions before installing range.

•   Remove all packing materials from the oven 

compartments before connecting the electrical 
supply to the range.

•   Observe all governing codes and ordinances.
•   Be sure to leave these instructions with the consumer.
NOTE
Keep these instructions with your owner’s manual for 
future reference.
•   As when using any appliance generating heat, there 

are certain safety precautions you should follow. 

•   Be sure your range is installed and grounded 

properly by a qualified installer or service technician.

•   Make sure the wall coverings around the range can 

withstand the heat generated by the range.

•   To eliminate the need to reach over the surface 

elements, cabinet storage space above the elements 
should be avoided.

TOOLS NEEDED

Gloves

Safety Glasses

Tape Measure

Pencil

Rear filler & 2 Screws

(LSE Series only)

Gloves

Safety Glasses

Tape Measure

Pencil

Rear filler & 2 Screws

(LSE Series only)

Gloves

Safety Glasses

Tape Measure

Pencil

Rear filler & 2 Screws

(LSE Series only)

PREPARE TO INSTALL THE RANGE

PARTS NOT PROVIDED

WARNING

•  The information in this manual 

should be followed exactly.

-  A fire or electrical shock may result causing 

property damage, personal injury or death.

Gloves

Safety Glasses

Tape Measure

Pencil

Rear filler & 2 Screws

(LSE Series only)

CAUTION

•  You should put on gloves during 

the installation procedure.

-  Failure to do so can result in bodily injury. 

Gloves

Safety Glasses

Tape Measure

Pencil

Rear filler & 2 Screws

(LSE Series only)

WARNING

•  Any person should not 

step or sit on the oven 

door. You should install the 

Anti-Tip Bracket supplied 

with the range.

-  The range could be tipped and 

injury might result from spilled hot 

liquid, food, or the range itself.

-  If the range is pulled away from  

the wall for cleaning, service, or 

any other reason, ensure that the 

Anti-Tip Device is properly 

reengaged when the range is 

pushed back against the wall.

Gloves

Safety Glasses

Tape Measure

Pencil

Rear filler & 2 Screws

(LSE Series only)

Gloves

Safety Glasses

Tape Measure

Pencil

Rear filler & 2 Screws

(LSE Series only)

(For Anti-Tip Bracket Mounted 

on Concrete Floors and Walls)

Summary of Contents for LDE3015SB












Reviews: