background image

Part 1

SAFETY

2

BEFORE YOU BEGIN

Remove all tape and packing materials before using the range.  
Dispose of all plastic bags after unpacking the range. Never allow children to play with packing materials.

IMPORTANT SAFETY INSTRUCTIONS

Read and follow all instructions before using your oven to prevent the risk of fire, electric shock, personal injury, 
or damage when using the range. This guide does not cover all possible conditions that may occur. For further 
assistance contact your service agent or manufacturer.

1

Gloves

Safety Glasses

Tape Measure

Pencil

Rear filler & 2 Screws

(LSE Series only)

This symbol will alert you to hazards or unsafe practices which could cause serious 

bodily harm or death.

Gloves

Safety Glasses

Tape Measure

Pencil

Rear filler & 2 Screws

(LSE Series only)

WARNING

This symbol will alert you to hazards or unsafe practices which could cause bodily 

injury or property damage.

Gloves

Safety Glasses

Tape Measure

Pencil

Rear filler & 2 Screws

(LSE Series only)

CAUTION

WARNING

•  The information in this manual should be followed exactly.

-  A fire or electrical shock may result causing property damage, personal injury or death.

•  Any person should not step or sit on the oven door. You should install the Anti-Tip 

Bracket supplied with the range.

-  The range could be tipped and injury might result from spilled hot liquid, food, or the range itself.

-  If the range is pulled away from  the wall for cleaning, service, or any other reason, ensure that the Anti-Tip 

Device is properly reengaged when the range is pushed back against the wall.

•  You should use two or more people to move and install range.  

(Excessive Weight Hazard)

-  Failure to do so can result in back or other injury.

•  You never pull or push any handles of upper& lower door to move and install range. 

-  Failure to do so can result in serious damage to the door of the range. 

•  New branch-circuit installations (1996 NEC) for mobile homes, recreational vehicles, 

and installations where local codes do not allow grounding through the neutral wire 

require a 4-conductor UL listed range cord or 4 wire conduit connection.

•  Power supply cord and plug should not be modified. If it will not fit the outlet, have a 

proper outlet Installed by a qualified electrician.

•  Using an extension cord to connect the power is prohibited. The way to connect the 

power cord and plug directly is strongly recommended. 

•  Electrical ground is required on this appliance.

•  You should make sure that the power cord is not pinched by the range or heavy objects. 

-  Failure to do so can result in serious burns or electrical shock. 

•  You never remove the protection cover covering the rear of lower oven.  

-  Failure to do so can result in serious damage to power cord. The damage causes serious burns and electric 

shock. 

This is the safety alert symbol. This symbol alerts you to potential hazards that can cause personal injury to you and 

others. All safety messages will follow the safety alert symbol with either the word  “WARNING” or “CAUTION”.

Summary of Contents for LDE3015SB












Reviews: