ENGLISH
9
[Power]
[General] [Power]
Power-related feature settings
[No Signal Power Off](15 min.)
Set whether to use the 15 Min Auto Off feature.
•
You can set this option to [On] or [Off].
•
If you set this feature to [On], the product turns off when it has remained in No Signal status for 15 minutes.
•
If you set this feature to [Off], the 15 Min Force Off feature is disabled.
•
It is recommended that you set this feature to [Off] if you intend to use the product for long periods of time as the
feature turns the power of the product off.
[No IR Power Off]
Set whether to use the No IR Power Off feature.
•
You can set this option to [Off], [2 hours], [4 hours], [6 hours], or [8 hours].
•
If you set this feature to [2 hours], [4 hours], [6 hours] or [8 hours], the product turns off if there is no input from
the remote control for the corresponding period.
•
If you set this feature to [Off], the No IR Power Off feature is disabled.
[DPM]
Set the Display Power Management (DPM) mode.
•
If this feature is not set to [Off], the monitor will enter DPM mode when there is no input signal.
•
If you set this feature to [Off], [DPM] is disabled.
•
You can set this feature to [Off], [5 sec.], [10 sec.], etc.
[DPM Wake Up Control]
Set conditions for releasing the DPM status according to the digital signal processing of the connected DVI/HDMI port.
•
When set to [Clock], the set checks for digital clock signals and releases the DPM status once it finds the clock
signal.
•
When set to [Clock+DATA], the set releases the DPM status when both the clock signal and data of the digital signal
are entered.
Summary of Contents for L18
Page 62: ......
