Connecting
17
C
onnecting
2
Resolution Setting
The player provides several output resolutions for
HDMI OUT and COMPONENT VIDEO OUT jacks. You
can change the resolution using [Setup] menu.
1. Press HOME
(
n
).
2. Use
A/D
to select the [Setup] and press ENTER
(
b
). The [Setup] menu appears.
3. Use
W/S
to select [DISPLAY] option then
press
D
to move to the second level.
4. Use
A/D
to select the [Resolution] option
then press ENTER (
b
) to move to the third level.
5. Use
W/S
to select the desired resolution then
press ENTER (
b
) to confirm your selection.
About Ferrite Core (for EMI
only)
Be sure to attach the ferrite core to the power cord.
This ferrite core can reduce noise.
How to attach the ferrite core
1. Press the stopper [a] of the ferrite core to open.
2. Wind the power cord on the unit once on the
ferrite core.
3. Close the ferrite core until it clicks.
Refer to the fig.3.
2 Connecting
About Ferrite Core (for EMI only)
Be sure to attach the ferrite core to the speaker
cable. This ferrite core can reduce noises.
How to attach the ferrite core
1. Press the stopper [a] of the ferrite core to open.
2. Wind the power code of the unit
once
on
the ferrite core.
3. Close the ferrite core until it clicks.
Refer to the fig.3 and comment.
(fig.3)
Summary of Contents for HR925M
Page 95: ......
