14
ENGLISH
Battery Charging and Alerts
Open the
Charging port
cover and connect the charger to the
Charging port.
Indicator Lamp
Red
Purple
Blue
Battery Status
Charging
80%
Completed
If the charging cable is removed while the
Power switch
is ON, the
power turns on and the product automatically connects to the
device whose connection settings have been completed.
Slide and hold the
Volume jog switch
in the volume down ( ) direction for one second to check the
Indicator lamp
and battery level by voice.
Battery Status
Sufficient
Normal
Insufficient
Indicator Lamp
Blue flashes
Purple flashes
Red flashes
Vibration Alert Settings
The vibration alert is automatically set to the ON position when you
turn on the power.
To activate or deactivate the vibration setting, slide and hold the
Volume jog switch
in the volume up ( ) direction for two seconds.
NOTE: If you turn off the vibration alerts, it will not vibrate even when
a call is being received or you are out of communication range.
Out of Range
If the device connected to the product is out of effective communication range (33 feet/10 meters),
the communication signal becomes weak and the communication is lost.
If the device comes back within effective communication range, the product automatically reconnects
to the device. If the device is not automatically reconnected, press the
MFB
on the product to connect
to it manually.
