GRILLE and DRIP
TRAY
Exterior Dispenser
Water Tank
Cap Tank
(Big & Small)
Valve Assembly
1.
Remove the HOLE part of the GRILLE with the finger.
2.
Wipe moisture out around the DOOR part and the
DRIP TRAY using a clean cloth.
1.
Lift the WATER TANK up by pressing the fixing LEVER
on the bottom of WATER TANK and then remove it.
2.
Wipe moisture out around the DOOR part and the
DRIP TRAY using a clean cloth.
Wipe moisture etc out outside of Dispenser and on the
Dispenser Pad using a cloth.
Clean and fully rinse the Cap Tank (Big & Small) by using
neutral cleansing agent.
Especially for the groove part of the CAP TANK, it is
convenient to cleanse it by using a small brush.
Clean and fully rinse the VALVE ASSEMBLY by using a
small brush. Rinse it while operating the bottom part of
the valve assembly. Always fix the Sealing Rubber
separated for cleansing at the existing position (may
result in water leakage).
Care and Maintenance
