19
OPERATION
ENGLISH
NOTE
• The dashes under the symbol give you
information about the type of fabric and the
maximum allowance of mechanical stress.
Checking the Clothes before
Loading
• Combine large and small items in a load. Load
large items first.
• Large items should not be more than half of the
total wash load. Do not wash single items. This
may cause an unbalanced load. Add one or two
similar items.
• Check all pockets to make sure that they are
empty. Items such as nails, hair clips, matches,
pens, coins and keys can damage both your
appliance and clothes.
• Wash delicates (stockings, underwired bras) in a
wash net.
• Close zippers, hooks and strings to make sure
that these items do not snag on other clothes.
• Pre-treat dirt and stains by brushing a small
amount of detergent dissolved water onto stains
to help lift dirt.
Closing the Door and Drawer
1
Gently push down on the Mini Washer’s Lid
until it clicks.
2
Push the drawer until it has completely closed.
CAUTION
• Do not let your hands get stuck between the
door and the washing machine, as this can cause
injury.
• Forcing the drawer or the Lid to open can cause
parts to be damaged and safety problems.
• Closing the drawer before having closed the Lid
completely may scratch the Lid glass.
• Ensure the drawer is pulled out completely to
prevent the Lid from contacting the front of the
Main Washer.
NOTE
• The Lid lock may fail if there is too much clothes
in the mini washer or if the Lid is not completely
closed.
•
H
lights up when the programme starts and the
door is locked. To open the drawer, press the
Start/Pause
button to stop the washer.
• If
dE1
,
dEz
or
dO
appears on the display, close the
drawer and the Lid completely. After doing so,
press the
Start/Pause
button again.
• If the drawer cannot be opened completely, pull
the drawer forward with a little force using both
hands.
• If power failure occurs during product
operation, the door cannot be opened. Restore
the power again or contact the LG service centre.
• The Lid may not open due to high ambient
temperatures, if this occurs after a wash and
there are no error codes on the display, select
the
Rinse+Spin
programme or wait until
temperatures drop so that the Lid can be
released.
Adding Detergents and
Softeners
Detergent Dosage
• Detergent should be used according to the
instruction of the detergent manufacturer and
selected according to type, colour, soiling of the
• Do not wash
Symbol
Wash / Fabric type
global_main.book.book Page 19 Tuesday, March 23, 2021 3:42 PM
