Connecting
12
C
onnecting
2
Connecting to an
Amplifier
Connecting Audio cable
Connect the AUDIO OUTPUT on the unit to 2CH
AUDIO IN on amplifier with Audio cable, such as
AUDIO Left/Right with white/red.
Rear of the Unit
Receiver / Amplifier
Audio
Cable
Connecting COAXIAL
(digital audio) cable
Connect one of the unit’s DIGITAL AUDIO OUTPUT
(COAXIAL) jacks to the corresponding jack on your
amplifier.
OPTICAL
Rear of the Unit
Receiver / Amplifier
Coaxial
Cable
y
If your TV is not capable of handling 96 kHz
sampling frequency, set the [Sample Freq.]
option to [48 kHz] on the setup menu.
y
If your TV is not equipped with Dolby Digital
and MPEG decoder, set the [Dolby Digital] and
[MPEG] options to [PCM] on the setup menu.
y
Changing the resolution when the unit is
connected with HDMI connector may result in
malfunctions. To solve the problem, turn off the
unit and then turn it on again.
y
If the audio format of the digital output
does not match the capabilities of your
amplifier, the amplifier will produce a strong,
distorted sound or no sound at all.
y
To see the audio format of the current disc
in the on-screen display, press AUDIO.
y
This unit does not perform internal (2
channel) decoding of a DTS sound track.
To enjoy DTS multi channel surround, you
must connect this unit to a DTS compatible
amplifier via one of this unit’s digital audio
outputs.
,
Note
Connecting HDMI cable
Connect the HDMI OUTPUT on the unit to the
HDMI IN on amplifier with HDMI cable.
(Type A, High Speed HDMI™ Cable).
Connect the HDMI OUT jack on amplifier to HDMI
IN jack on TV with HDMI cable, if the amplifier has
HDMI OUTPUT jack.
COAXIAL
OUT
Rear of the Unit
Receiver /
Amplifier
HDMI
Cable
TV
HDMI
Cable