LG DVRK789 Owner'S Manual Download Page 7

Page: 7 / 60

Overview (Continued)

About DVD recording

otes

• This recorder cannot make recordings on CD-R or

CD-RW discs.

• Our company takes no responsibility for recording fail-

ure due to power cuts, defective discs, or damage to
the recorder.

• Fingerprints and small scratches on a disc can affect

playback and/or recording performance. Please take
proper care of your discs.

Disc types and recording formats, modes,
and settings

This recorder can play various kinds of DVD discs:
pre-recorded DVD-Video discs, DVD-RW, DVD-R,
DVD+RW and DVD+R discs. The disc format for DVD-R
discs is always “Video format”—the same as pre-record-
ed DVD-Video discs. This means that once finalized,
you can play a DVD-R in a regular DVD player.
By default, the DVD-RW disc format is Video format,
though you can change this to Video Recording format,
if required. (Reinitializing the disc will erase the contents
of the disc.)
The recording mode is closely related to the disc format.
If the disc format is Video Recording format, then the
recording mode is VR mode; if the disc format is Video
mode, then the recording mode is Video mode (except
for DVD-Video, which is not recordable, and so does not
have a recording mode).
Within the recording modes (which are fixed for the
whole disc) are the record settings. These can be
changed as required for each recording and determine
the picture quality and how much space the recording
will take up on the disc.

Notes for recording

• The recording times shown are not exact because the

recorder uses variable bit-rate video compression.
This means that the exact recording time will depend
on the material being recorded.

• When recording a TV broadcast, if the reception is

poor or the picture contains interference, the record-
ing times may be shorter.

• If you record still pictures or audio only, the recording

time may be longer.

• The displayed times for recording and time remaining

may not always add up to exactly the length of the
disc.

• The recording time available may decrease if you

heavily edit a disc.

• If using a DVD-RW disc, make sure you change the

recording format (Video mode or VR mode) before
you record anything on the disc. See page 2

(Initialize) for how to do this.

• When using a DVD-R disc, you can keep recording

until the disc is full, or until you finalize the disc.
Before you start a recording session, check the
amount of recording time left on the disc.

• When using a DVD-RW disc in Video mode, recording

time available will only increase if you erase the last
title recorded on the disc.

• The Erase Title option in the Title List-Original menu

only hides the title, it does not actually erase the title
from the disc and increase the recording time avail-
able (except for the last recorded title on a DVD-RW
disc in Video mode).

• The overwrite recording is available with DVD+RW disc.

Recording time and picture quality

There are five preset recording quality modes:

XP – Highest quality setting, gives about
1 hour of recording time on a DVD (4.7GB).

SP – Default quality, sufficient for most applications, gives
about 2 hours of recording time on a DVD (4.7GB).

LP – Slightly lower video quality, gives about 4 hour of
recording time on a DVD disc (4.7GB).

EP – Lowest video quality, gives about 6 hour of
recording time on a DVD (4.7GB).

MLP – The longest recording time with the lowest
video quality, gives about 11 hours of recording time
on a DVD (4.7GB).

Disc type

Disc format

Recording mode

Functions