Insert the battery (Lithium battery)
N
otes
• Do not expose the Remote Control sensor to bright light.
• Do not place obstacles between the Remote Control sensor and
the Remote Control
.
V
V
Replacing the button-type battery
The battery normally lasts for about a year. Replace the battery if
the Remote Control fails to operate the unit when used within the
operation range.
Button-type battery (Lithium battery)
1. Pinch the battery holder clip together then pull the tab to
remove the battery holder.
2. Insert the battery with the + facing in the same direction as the
+ on the battery holder.
3. Replace the battery holder with battery into the Remote Control
unit making sure that it is fully inserted.
• Replace Remote Control unit battery with 3V micro lithium cells
such as CR. 2025 or its equivalent.
• Dispose of battery safety in accordance with local laws. Do not
dispose of in fire.
Warning:
The battery used in this device may present a fire or
chemical burn hazard if mistreated. Do not recharge,
disassemble, incinerate, or heat above 100 °C (212
°F).Replace the battery with Matsushita Elec. Ind. Co.,
Ltd. (Panasonic), part no. CR. 2025 only.
Use of another battery may present a risk of fire or
explosion. Dispose of used batteries. Keep batteries
away from children. Do not disassemble or dispose of
in fire.
Identification of Controls (Continued)
10
Summary of Contents for DP170
Page 36: ......
