LG D008KE1N211, Owner'S Manual

Page: 23 / 176

Operating 23
Oper
ating
2
[Winter Mode Period]
Tap current value to display the setting menu. You can change the period
1. Select the currently selected value. Period setting menu is displayed.
2. Adjust [Month] and [Day] using
S
or
W
.
3. Select [APPLY] to complete the setting.
Energy Device
Select [ ] > [Energy Device] to display the Energy Device screen.
[eV]
Tap this switch to select [On] or [Off].
When ‘EV Meter Enable’ not setting, Error Popup
occurred.
Set the option [On] to enable EV monitoring.
[AWhP]
Tap this switch to select [On] or [Off].
If its status is “Connection Available“, wait until it becomes “Connected.” If it is not connected to
the end, check heat pump connection is connected properly.
The status description of the energy device is as follows.
y
Connection Not Allowed : AWHP setting is disabled
y
Connection Available : AWHP setting is enabled and is not connected
y
Connected : AWHP setting is enabled and is connected
Quick Install Guide
Select [ ] > [Quick install guide] to display the install guidance screen.
You can check the brief installation instruction on the [Quick install Guide] screen.