Installation
39
Install
ation
2
WLAN Dongle Connection
The installer settings and power monitoring can be viewed only in the mobile device connected
wirelessly to the product. To connect the product to your mobile device, the WLAN dongle supplied
with the product package must be connected to the product.
Insert the WLAN dongle to the USB connector at the bottom of the product as shown in the figure.
usb
Turning on the Product
When all the connections are finished, check the status in numbering order below.
1) Switch the AC circuit breaker to the ‘ON’ position.
2) Switch the DC circuit breaker of the connected battery to the ‘ON’ position.
3) Turn the PV switch of the PCS to the ‘ON’ position.
Turning off the Product
The order of turning off the product is the reverse order of turning on.
1) Turn the PV switch of the PCS to the ‘OFF’ position.
2) Switch the DC circuit breaker of the connected battery to the ‘OFF’ position.
3) Switch the AC circuit breaker to the ‘OFF’ position.
