LG CodePlus HCS6300 Series Installation & Setup Manual Warranty Download

Page: 7 / 52

206-4122

HCS6300 Product Description

The HCS6300 MUX/MOD controller is one of the LG CodePlus series feature cards.

Features

•  Part of modular system, easily scaled for each application
•  Controls up to eleven CodePlus transcoder cards with a single IP connection *
•  Supports Pro:Idiom

encryption key maintenance

• Generates four contiguous 256-QAM cable channels, with up to two program streams

multiplexed on each channel

• RF output available to connect to site’s RF distribution system
• Short 3U height profile to minimize rack space usage

HCS6300

RF OUT

ETHERNET

SERVICE

PORT

RESET

STATUS

While HCS6300 MUX/MOD functionality is only applicable for the transcoder cards installed in Slots 1,

2, 4, 5, 8, 9, 11, and 12, up to three additional transcoders (connected to external modulators and

upconverters) may be installed in an HCS6100R card frame. Transcoder configuration options that are

not tied directly to HCS6300 MUX/MOD functionality will also be available for any additional cards.

Summary of Contents for CodePlus HCS6300 Series




















































Search results

Summary of Contents for CodePlus HCS6300 Series

Reviews:

Related manuals for CodePlus HCS6300 Series

Brands by name

Popular brands

LG CodePlus HCS6300 Series, Installation & Setup Manual Warranty

Search results

Summary of Contents for CodePlus HCS6300 Series

Reviews:

Related manuals for CodePlus HCS6300 Series

Brands by name

Popular brands