LG CineBeam PH510PG Owner'S Manual Download Page 108

Page: 108 / 109

108

Open Source Software Notice Information

To obtain the source code under GPL, LGPL, MPL, and other open source

licenses, that is contained in this product, please visit https://opensource.

lge.com.

In addition to the source code, all referred license terms, warranty

disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a

charge covering the cost of performing such distribution (such as the cost

of media, shipping, and handling) upon email request to opensource@lge.

com

This offer is valid for a period of three years after our last shipment of this

product. This offer is valid to anyone in receipt of this information.

SYMBOLS

Refers to alternating current (AC).
Refers to direct current (DC).
Refers to class II equipment.

Refers to stand-by.

Refers to “ON” (power).

Refers to dangerous voltage.

Summary of Contents for CineBeam PH510PG














































































































Search results

Summary of Contents for CineBeam PH510PG

Reviews:

Related manuals for CineBeam PH510PG

Brands by name

Popular brands

LG CineBeam PH510PG, Owner'S Manual

Search results

Summary of Contents for CineBeam PH510PG

Reviews:

Related manuals for CineBeam PH510PG

Brands by name

Popular brands