LG CineBeam PH450U Owner'S Manual Download Page 80

Page: 80 / 117

ENGLISH

Watching the Videos

In the

Movie List

, you can watch movies stored on the connected USB device.

Controls playback and sets options while viewing videos.

Tips for Playing Video Files

•

Some subtitles created by users may not work properly.

•

The video and subtitle files should be placed in the same folder. For subtitles to

display correctly, the video and subtitle files must have the same name.

•

We do not support any stream that contains GMC (Global Motion

Compensation) or Qpel (Quarterpel Motion Estimation).

•

Only H.264/AVC profile level 4.1 and lower is supported.

•

Video files that exceed 50 GB (gigabyte) are not supported for playback. The file

size limit is dependent on the encoding environment.

•

DTS audio codec is not supported.

Summary of Contents for CineBeam PH450U






















































































































Search results

Summary of Contents for CineBeam PH450U

Reviews:

Related manuals for CineBeam PH450U

Brands by name

Popular brands

LG CineBeam PH450U, Owner'S Manual

Search results

Summary of Contents for CineBeam PH450U

Reviews:

Related manuals for CineBeam PH450U

Brands by name

Popular brands