LG CineBeam Laser 4K HU80KA Owner'S Manual Download Page 143

Page: 143 / 182

ENGLISH

Sound Settings

Smart Sound Mode

(Q. Settings)

Sound

Smart Sound Mode

Automatically optimize sound based on content type.
This setting is only available for Internal Projector Speaker.
In the list, click

to enable this mode.

•

If this feature is turned on, you can’t adjust the Sound Mode manually.

•

This feature is available on certain models only.

Sound Mode

(Q. Settings)

Sound

Sound Mode Settings

Sound Mode

•

Standard

Optimizes the sound for all types of content.

•

Cinema

Optimizes the sound for cinemas.

•

Clear Voice III

Boosts voice clarity.

•

Sports

Soccer

Optimizes the sound for sports.

The name of the sport may differ depending on region.

•

Music

Optimizes the sound for music.

•

Game

Optimizes the sound for gameplay.

Summary of Contents for CineBeam Laser 4K HU80KA























































































































































































LG CineBeam Laser 4K HU80KA, Owner'S Manual, Page: 143 / 182

Search results

Summary of Contents for CineBeam Laser 4K HU80KA

Reviews: