1
8
PRODUCT INSTALLATION
ENGLISH
- When carrying the suspended, unit pass the
ropes under the unit and use the two sus-
pension points each at the front and rear.
- Always lift the unit with ropes attached at
four points so that impact is not applied to
the unit.
- Attach the ropes to the unit at an angle of
40° or less.
Locking points for
transportation ropes
Forklift Carrying Guide
Forklift Carrying Hole
Be very careful while carrying the prod-
uct.
• Do not have only one person carry prod-
uct if it is more than 20 kg.
• PP bands are used to pack some prod-
ucts. Do not use them as a mean for
transportation because they are danger-
ous.
• Do not touch heat exchanger fins with
your bare hands. Otherwise you may
get a cut in your hands.
• Tear plastic packaging bag and scrap it
so that children cannot play with it. Oth-
erwise plastic packaging bag may suffo-
cate children to death.
• When carrying in Outdoor Unit, be sure
to support it at four points. Carrying in
and lifting with 3-point
support may make Outdoor Unit unsta-
ble, resulting in a fall.
• Use 2 belts of at least 8 m long.
• Place extra cloth or boards in the loca-
tions where the casing comes in con-
tact with the sling to prevent damage.
• Hoist the unit making sure it is being
lifted at its center of gravity.
CAUTION
!
Capacity(kBtu/h)
Weight(kg)
70
185
<Weight per Capacity>
Lifting method of the outdoor unit
Summary of Contents for B70AWYN985
Page 54: ......