LG B30AWYN7G6 Owner'S Manual Download Page 4

• If strange sounds, or smell or smoke comes from product. Turn the breaker off or disconnect

the power supply cable. There is risk of electric shock or fire.

• Stop operation and close the window in storm or hurricane. If possible, remove the product

from the window before the hurricane arrives. There is risk of property damage, failure of
product, or electric shock.

• Do not open the inlet grill of the product during operation.(Do not touch the electrostatic filter,

if the unit is so equipped.) There is risk of physical injury, electric shock, or product failure.

• If the product is soaked (flooded or submerged), contact an Authorized Service Center. There

is risk of fire or electric shock.

• Be cautious that water could not enter the product. There is risk of fire, electric shock, or

product damage.

• Ventilate the product from time to time when operating it together with a stove, etc. There is

risk of fire or electric shock.

• Turn the main power off when cleaning or maintaining the product. There is risk of electric

shock.

• When the product is not be used for a long time, disconnect the power supply plug or turn off

the breaker. There is risk of product damage or failure, or unintended operation.

• Take care to ensure that nobody could step on or fall onto the outdoor unit. This could result

in personal injury and product damage.

CAUTION

Installation

• 

Always check for gas (refrigerant) leakage after installation or repair of product. Low refrigerant
levels may cause failure of product.

• 

Install the drain hose to ensure that water is drained away properly. A bad connection may cause
water leakage.

• 

Keep level even when installing the product. To avoid vibration or water leakage.

• 

Do not install the product where the noise or hot air from the outdoor unit could cause a problems
for your neighbors.

• 

Use two or more people to lift and transport the product. Avoid personal injury.

• 

Do not install the product where it will be exposed to sea wind (salt spray) directly. It may cause
corrosion on the product. Corrosion, particularly on the condenser and evaporator fins, could cause
product malfunction or inefficient operation.

• Contact the authorized service technician for repair or maintenance of this unit.

• Contact the installer for installation of this unit.

• When the power cord is to be replaced, replacement work shall be performed by authorized

personnel only using only genuine replacement parts.

• Installation work must be performed in accordance with the National Electric Code by qualified and

authorized personnel only.

• The air conditioner should be used only for the applications for which it has been designed : the

indoor unit is not suitable to be installed in areas used for laundry.

• If anyone other than a licensed professional installs, repairs, or alters LG Electronics air conditioning

products, the warranty is voided. All costs associated with repair are then the full responsibility of
the owner.

• Do not install the unit in potentially explosive atmospheres.

!

4

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

Summary of Contents for B30AWYN7G6

















Reviews: