36
USER SETTINGS
ENGLISH
To Run a sound test
Remote Control (SETTINGS) Sound Sound Test
Run a sound test to check that sound signals are outputted normally, then solve any problems by
selecting the relevant option on the screen. If there are no problems with the Sound Test, check
connected external devices.
Network Settings
To Set a Signage Name
Remote Control (SETTINGS) Network Signage Name
You can set a name for Signage Monitor that will be used on the network by using the on-screen
keyboard.
To Set Your Network
Remote Control (SETTINGS) Network Wired Connection (Ethernet)
Connecting to a wired network:
connect the display to a Local Area Network (LAN) via the LAN port
as shown in the following illustration and set up the network settings. Only wired network connections
are supported. After making a physical connection, a small number of networks may require the display
network settings to be adjusted. For most networks, the display will automatically make a connection
without any adjustments. For detailed information, contact your Internet provider or consult your router
manual.
To Set Your Wireless Network
Remote Control (SETTINGS) Network Wi-Fi Connection
If you have set the display up for a wireless network, you can check and connect to the available
wireless Internet networks.
•
Add a Hidden Wireless Network
: If you input the name of network directly, you can add a wireless
network.
•
Connect via WPS PBC
: Connects easily when the button of a wireless AP supporting PBC is
pressed.
•
Connect via WPS PIN
: Connects easily when the PIN of the wireless AP that you wish to connect to
is entered in to the AP configuration webpage.
•
Advanced Settings
: If you input the information of network directly, you can enter a wireless network.
If there is no wireless network available, click Advanced Settings. You can add a network.