ENGLISH
23
1 Power (Command: k a)
►
To control power on or off of the set.
Transmission
(k)(a)( )(
[Set ID]
)( )(
Data
)(Cr)
Data
00 : [
Off
]
Data
01 : [
On
]
Ack
(a)( )(
[Set ID]
)( )(
OK
/
NG
)(
Data
)(x)
►
To show signage is power on or *Off
Transmission
(k)(a)( )(
[Set ID]
)( )(FF)(Cr)
Ack
(a)( )(
[Set ID]
)( )(
OK
/
NG
)(
Data
)(x)
* Similarly, if other functions transmit ‘FF’ data based
on this format, Acknowledgement feedback presents
status about each function.
* OK Ack., Error Ack. and other message may display
on the screen when signage is power on.
2 [Aspect Ratio] (Command: k c) (Main Picture Size)
►
To adjust the screen format. (Main picture format)
You can also adjust the screen format using the
picture settings.
Transmission
(k)(c)( )(
[Set ID]
)( )(
Data
)(Cr)
Data
01 : [
4:3
] (Normal screen - Just Scan Off)
Data
02 : [
16:9
] (Wide screen - Just Scan Off)
Data
06 : [
Original
] (Just Scan Off)
Data
09 : [
Just Scan]
Ack
(c)( )(
[Set ID]
)( )(
OK
/
NG
)(
Data
)(x)
* Using the PC input, you select either 16:9 or 4:3
screen aspect ratio.
* In DTV/HDMI/Component mode (high-definition),
Just Scan is available.
* Full wide mode may work differently based on
model and is supported for DTV fully, and ATV, AV
partially.
3 Screen Mute (Command: k d)
►
To select screen mute on/off.
Transmission
(k)(d)( )(
[Set ID]
)( )(
Data
)(Cr)
Data
00 : Screen mute off (Picture on) / Video mute off
Data
01 : Screen mute on (Picture off)
Data
10 : Video mute on
Ack
(d)( )(
[Set ID]
)( )(
OK
/
NG
)(
Data
)(x)
* In case of video mute on only, monitor will display
On Screen Display(OSD). But, in case of Screen mute
on, monitor will not display OSD.
4 Volume Mute (Command: k e)
►
To control volume mute on/off. You can also adjust
mute using the mute button on remote control.
Transmission
(k)(e)( )(
[Set ID]
)( )(
Data
)(Cr)
Data
00 : Volume mute on (Volume off)
Data
01 : Volume mute off (Volume on)
Ack
(e)( )(
[Set ID]
)( )(
OK
/
NG
)(
Data
)(x)
5 Volume Control (Command: k f)
►
To adjust volume. You can also adjust volume with
the volume buttons on remote control.
Transmission
(k)(f)( )(
[Set ID]
)( )(
Data
)(Cr)
Data
Min : 00 to Max : 64
Ack
(f)( )(
[Set ID]
)( )(
OK
/
NG
)(
Data
)(x)
6 [Contrast] (Command: k g)
►
To adjust screen contrast. You can also adjust
contrast in the picture settings.
Transmission
(k)(g)( )(
[Set ID]
)( )(
Data
)(Cr)
Data
Min : 00 to Max : 64
Ack
(g)( )(
[Set ID]
)( )(
OK
/
NG
)(
Data
)(x)
