LG 60PH6700, Service Manual

Page: 4 / 64

- 4 -
LGE Internal Use Only Copyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
SPECIFICATION
NOTE : Specifications and others are subject to change without notice for improvement.
1. Application range
This spec sheet is applied all of the PDP TV with PA32A chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
(1) Temperature: 25 °C ± 5 °C(77 °F ± 9 °F), CST: 40 °C ± 5 °C
(2) Relative Humidity: 65 % ± 10 %
(3) Power Voltage
: Standard input voltage (AC 100-240 V~, 50/60 Hz)
* Standard Voltage of each products is marked by models.
(4) Specification and performance of each parts are followed each drawing and specification by part number in accordance with
BOM.
(5) The receiver must be operated for about 5 minutes prior to the adjustment.
3. Test method
(1) Performance: LGE TV test method followed
(2) Demanded other specification
- Safety : CE, IEC specification
- EMC : CE, IEC
4. Module General Specification
- 60" 3D FHD
No Item Specification Remark
1 Display Screen Device 152 cm (60 inch) wide Color Display Module PDP
2 Aspect Ratio 16:9
3 PDP Module PDP60R5####,
RGB Closed (Well) Type, Glass Filter (43%)
Pixel Format: 1920 horiz. By 1080 ver.
4 Operating Environment 5) Temp. : 0 ~ 40 deg
6) Humidity : 20 ~ 80%
LGE SPEC
5 Storage Environment 7) Temp. : -20 ~ 60 deg
8) Humidity : 10 ~ 90 %
6 Input Voltage AC220 ~ 240V, 50/60Hz Maker LG