LG 49LW310C.BTR, Installation Manual

Page: 24 / 57

ENGLISH
24
TV MANAGER
y
Splash Image update function supports only JPEG format file of less than 1 MB filesize..
y
Except for JPEG images with progressive encoding.
y
We recommend you that splash image resolution match the TV`s panel resolution.
y
'Max resolution of splash image : Full HD->1920x1080, HD->1360x768.
y
'Min resolution of splash image : Full HD->64x64, HD->64x64.
y
TV keep splash image until you change a new splash image.
y
Please do not use the ampersand character(&) and the left angle bracket (<) in the filename to use
DZM file on EZ Download.
y
Non-standard photo/image file may not be displayed.
2. Diagnostics
Diagnostics Setup
y y
Image shown may differ from your TV.
Introduction
This diagnostic function provides current status information of the TV in XML file format using a USB
device. If the user sets a signal standard level, SignalTrace checks the signal strength status of the digital
channel that the user tuned to. It checks and records good and bad channel signals, and then provides the
signal information to a USB storage device in XML file format.
Diagnostics Setup USB
OK Previous
Diagnostics
TV Manager
Installation Menu (V 3.0)
LG Hotel Mode Setup
Password Change
Set ID Setup
Configuration Setup
Time Scheduler
Lock Mode
External Speaker
HCEC Setup
Insert Image
Welcome Video
TV Manager
OK
S/W : 00.02.00.01 Micom : 0.00.32
1 Overview Diagnostics
1. It provides status information of the TV and information about the current input in XML file format.
(There are two kinds of information. There is information which is extracted regardless of the model,
such as the model name or boot version, and there is information which is available depending on
the model, such as the micom version, PTC version, etc.). The information created in the XML file
can be checked in the TV's UI by pressing 88888888 in the TV's Option menu.
2. If a SignalTrace standard level is set, it saves the average value of the channel signal with less than
30 tuning counts to the digital broadcasting channel. If the count is more than 30, it saves good and
bad signals by comparing the average signal value to the current signal strength and signalTrace
standard level (SignalTracer Set) value.