19
ENG
ENGLISH
Before Use
Registering the Remote Control
The Remote Control operates by pairing with your
TV.
Once you purchased the TV, please register the
Remote Control as follows;
How to register the Remote Control
Press the Wake-up pointer button to
pair the remote control.
How to Re-register the Remote Control after
Registration Failure
Reset the remote control by pressing
and holding the
ꕣ
BACK
button for 3
seconds. (Once the reset is complete,
the light on the Pointer blinks.) Then
repeat the above procedure to register
the remote control.
How to use the zoom in/out
gestures
1
Press and hold the zoom button for 2
seconds.
2
While holding the zoom button, draw a
circle in a clockwise direction to zoom in
or counter-clockwise direction to zoom
out.
(This feature is only available while using
Web.)
Precautions to Take when Using
the Remote Control
y
y
Use the remote control within the maximum
communication distance (10 m, 32.8 ft).
Using the remote control beyond this
distance, or with an object obstructing it,
may cause a communication failure.
y
y
A communication failure may occur due to
nearby devices. Electrical devices such as
a microwave oven or wireless LAN product
may cause interference, as these use the
same bandwidth (2.4 GHz) as the Remote
Control.
y
y
The Remote Control may be damaged or
may malfunction if it is dropped or receives a
heavy impact.
y
y
Manufacturer and installer cannot provide
service related to human safety as the
applicable wireless device has possibility of
electric wave interference.
y
y
It is recommended that an Access Point (AP)
be located more than 1 m (3.28 ft) away
from the TV. If the AP is installed closer
than 1 m (3.28 ft), the Remote Control may
not perform as expected due to frequency
interference.
y
y
LG Qwerty remote control or Logitech
google keyboard is only supported. Other
keyboard(HID) is may not be compatible.
y
y
When the Qwerty side is faced up, the
cursor is not moved to prevent the wobble.