ENGLISH
8
Limited Mode
-
Configure TV function’s limitation. When selected to ‘On’, following sub-menus will be worked by below.
Setup Menu
-
Permit to tune and manage Channels as ‘On’(permitted) or ‘Off’(not permitted).
Channel Change
•
Decide to change channel or not by setting ‘Program Change’ as ‘On’(Change Possible) or ‘Off’(Change Impossible) when present source is TV.
-
When ‘Channel Change’ is set to Off (Change Impossible)
»
Program Key, Numeral Key, List Key, Q.View Key don’t work and entering ‘Channel Menu’ in the Main Menu OSD is impossible.
»
‘Channel’ item in ‘On Time’ menu will be fixed.
»
Entering ‘Channels’ in the ‘Main Menu’ OSD is impossible regardless of ‘Channels’ item.
-
When ‘Program Change’ is set to On(Change Possible), ‘Program Key’, ‘Numeric Key’, ‘List Key’, ‘Q.View’ Key, ‘TV/RAD Key’, does work and
entering ‘Channel Menu’ in the Main Menu OSD is possible.
Menu Display
•
Function to decide whether work with menu (including relevant menus too) of control key (On – Enter possible) or not (Off – Enter
Impossible).
-
Although select Off(Enter impossible), the action that press a Menu button for 5 seconds to enter ‘Installation Menu’ is available.
-
When select On(Enter possible), Menu works.
OSD Display
•
Decide to display OSD or not by setting ‘OSD Display’ as On(Display) or Off(Do not Display).
-
When ‘OSD Display’ is set to ‘Off’(Do not Display), all OSD is not displayed except some exception.
-
Although select ‘Off’ (Do not Display), the action that press a Menu button for 5 seconds to enter ‘Installation Menu’ and entering service
menu are available. (In-Start, Power-Only, Adjust, Installation Menu…)
System Provider Mode
•
‘System Provider Mode’ allows access to the menu system from the front panel or remote control but access is controlled as follows:
-
When value is ‘On’, Accessible Items on the menu system, others are not permissible. (Depending on model)
»
Input select screens
»
Sleep timer
»
Aspect Ratio
»
Caption
»
Channels (Except for Channel Tuning & Settings and Channel Manager)
»
‘Safety’ / ‘Photo & Video’ / ‘Music’ / ‘Network’
»
Input Manager
-
If the channel map is empty, ‘Auto-tuning’ guide dialog should be blocked by pressing ‘List’, ‘CH+’, ‘CH-’ keys.
Summary of Contents for 43UU3 U Series
Page 33: ......
