ENG
ENGLISH
21
INSTALLATION MENU
Power On Default
-
Set the channel to display and Volume Level, etc. when turn on power in AC Power On or Stand-by status.
-
Set to Yes(Work) or No(Do Not Work).
-
When ‘Power On Default’ is set to No, it is not applied to the subordinate Input, Programme, A/V Setting, Aspect Ratio
menu.
-
When Power On Default is set to Yes, it can set by entering the subordinate menu.
Input
-
Set whether it is turned on by the set input source or by the last stored input source.
Programme
-
Select start channel number if Input source’s value is TV.
A/V Setting
-
If ‘A/V Setting’ is changed from ‘Off’ to ‘On’, A/V parameters that are set before entering ‘Installation Menu’ are applied
whenever turn on power.
Aspect Ratio
-
The aspect ratio determines the default aspect ratio that the set returns to on power up.
Power Management
y
The Power Management feature will turn off the television receiver if no input control command is received from either the Local
or IR Key within a selected hours.
-
Activity on either of these inputs shall reset the ‘Power Management’ timer and prevent interruption of TV viewing.
-
This entry can be set to a value which is corresponding to the desired hours (1Hour to 7Hours).
-
Default value is ‘Off(disabled)’.
Radio Video Blank
-
Set to Yes(Work) or No(Do Not Work).
-
Programme that is set to ‘Radio Programme’ and only has Sound should decide whether to set ‘Video Blank’ or not.
-
When ‘Radio Video Blank’ is set to Yes(Work), ‘Video Blank’ works only in case of Radio Programme.
-
Although set to Yes(Work), if there are Video signal, ‘Video Blank’ wouldn’t work. In consideration of case that display
background screen and broadcast only with Radio, ‘Video Blank ’works only when there is no Video signal.
-
When set to No(Do Not Work), ‘Video Blank’ do not work although it is the Radio Programme.
-
This operates only in the Analog TV Mode.
Factory Reset
-
Change all settings to their default values.
