55
206-4340
IP Environment Setup (Cont.)
(Continued from previous page)
Note:
If the mode has already been set in the Installer Menu (item 098 PRO:CENTRIC) or in
the EZ-Manager Wizard, the specified mode will be reflected in this field. If you change the
mode in this menu, Installer Menu item 098 will now reflect the value you selected here.
5. Select/specify the appropriate Update Event setting(s), as required.
Based on Update Time
settings, the Wake For Update feature wakes the TV once daily to check for, and if applicable,
download updates from the Pro:Centric server. See Installer Menu item 121 UPDATE TIME HR
description on page 34 for additional information on Wake For Update functionality.
• Select/highlight the
Update Event
field and press
OK
on the Installer Remote to toggle the
setting as required. When Update Event is enabled, an Update Time field is available in the
Pro:Centric Menu.
• If Update Event is enabled, set the Update Time as required. Select/highlight the
Update
Time
field (use the Down arrow key to access the field) and press
OK
. Then, in the subsequent
Time window, set the Update Time as required. Select each field in turn and specify the
appropriate Wake For Update time, as desired. Note that the Update Time set in this menu is
based on a 12-hour clock. Ensure the AM/PM specification is set accordingly.
•
Once fields in the Time window are completed as required,
select
OK
at the right of the
window and press
OK
on the Installer Remote to return to the Pro:Centric / IP Environment
Menu.
