LG 42LS73C Owner'S Manual Download Page 125

Page: 125 / 135

Easy Brightness Control

•

Adjusts the backlight according to the schedule you set.

•

You can set this option to On/Off.

•

Easy Brightness Control is disabled if the current time is not set.

•

You can add up to 6 schedules, and they are sorted in ascending order by time.

•

You can edit a schedule by selecting it from the list and pressing the OK button.

Web Browser

•

Launches the Chromium browser app and supports simple browsing.

•

The browser can perform basic tests for HTML-based apps and has the following properties:

- Supports basic web page browsing.

- Does not support additional features that aid the proper display of specific sites (UA Spoofing per site, etc.).

•

The browser has the following constraints:

- Supports mouse and remote control 5-key browsing, but does not support touchpad browsing.

- Does not support PIP.

- Does not guarantee the reliability of HTML content outside of the SI app (YouTube, etc.) as it is to be used for test

purposes.

ENGLISH

Summary of Contents for 42LS73C








































































































































Search results

Summary of Contents for 42LS73C

Reviews:

Related manuals for 42LS73C

Brands by name

Popular brands

LG 42LS73C, Owner'S Manual

Search results

Summary of Contents for 42LS73C

Reviews:

Related manuals for 42LS73C

Brands by name

Popular brands