ENGLISH
57
EXTERNAL CONTROL DEVICE SETUP
Control Panel Light (Command: m g)
•
For Plasma TV
►
To control the panel light.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
21. Input select (Command: x b)
(Main Picture Input)
►
To select input source for main picture.
Transmission [x][b][ ][Set ID][ ][Data][Cr]
Data 00 : DTV
01 : CADTV
02 : Satellite DTV
ISDB-BS (Japan)
03 : ISDB-CS1 (Japan)
04 : ISDB-CS2 (Japan)
10 : ATV
11 : CATV
20 : AV or AV1
21 : AV2
40 : Component1
41 : Component2
60 : RGB
90 : HDMI1
91 : HDMI2
92 : HDMI3
93 : HDMI4
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
* This function depends on model and signal.
22. 3D(Command: x t) (only 3D models)
(Depending on model)
►
To change 3D mode for TV.
Transmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01]
[ ][Data 02][ ][Data 03][Cr]
Data Structure
[Data 00] 00 : 3D On
01 : 3D Off
02 : 3D to 2D
03 : 2D to 3D
[Data 01] 00 : Top and Bottom
01 : Side by Side
02 : Check Board
03 : Frame Sequential
04 : Column interleaving
05 : Row interleaving
[Data 02] 00 : Right to Left
01 : Left to Right
[Data 03] 3D Effect(3D Depth): Min : 00 - Max : 14
(*transmit by Hexadecimal code)
* If [Data 00] is 00 (3D On), [Data 03] has no meaning.
* If [Data 00] is 01 (3D off) or 02 (3D to 2D), [Data 01],
[Data 02] and [Data 03] have no meaning.
* If [Data 00] is 03(2D to 3D), [Data 01] and [Data 02]
have no meaning.
* If [Data 00] is 03(2D to 3D), [Data 03] works when
3D Mode (Genre) is manual only.
* All 3D pattern options ([Data 01]) may not be available
according to broadcasting/video signal.
[Data 00]
[Data 01]
[Data 02]
[Data 03]
00
O
O
X
01
X
X
X
02
X
X
X
03
X
X
O
X : don’t care
Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02]
[Data03][x]
[t][ ][Set ID][ ][NG][Data00][x]
Summary of Contents for 28LN549M
Page 59: ......
