ENG
ENGLISH
MAKING CONNECTIONS
13
MAKING CONNECTIONS
This section on
MAKING CONNECTIONS
mainly uses diagrams for the MT55D models.
Connect various external devices to the TV and switch
input modes to select an external device. For more
information of external device’s connection, refer to the
manual provided with each device.
Available external devices are: HD receivers, DVD
players, VCRs, audio systems, USB storage devices,
PC, gaming devices, and other external devices.
NOTE
y
The external device connection may differ from
the model.
y
Connect external devices to the TV regardless
of the order of the TV port.
y
If you record a TV programme on a DVD
recorder or VCR, make sure to connect the
TV signal input cable to the TV through a DVD
recorder or VCR. For more information of
recording, refer to the manual provided with the
connected device.
y
Refer to the external equipment’s manual for
operating instructions.
y
If you connect a gaming device to the TV, use
the cable supplied with the gaming device.
y
In PC mode, there may be noise associated
with the resolution, vertical pattern, contrast or
brightness. If noise is present, change the PC
output to another resolution, change the refresh
rate to another rate or adjust the brightness and
contrast on the PICTURE menu until the picture
is clear.
y
In PC mode, some resolution settings may not
work properly depending on the graphics card.
Antenna connection
ANTENNA
/ CABLE IN
(Not Provided)
Connect the TV to a wall antenna socket with an RF
cable (75
Ω
).
NOTE
y
Use a signal splitter to use more than 2 TVs.
y
If the image quality is poor, install a signal
amplifier properly to improve the image quality.
y
If the image quality is poor with an antenna
connected, try to realign the antenna in the
correct direction.
y
An antenna cable and converter are not
supplied.
y
Supported DTV Audio: MPEG, Dolby Digital,
Dolby Digital Plus, HE-AAC
