background image

3

ENGLISH

 

To reduce the risk of fire or electrical shock, 

do not expose this product to rain, moisture 

or other liquids. Do not touch the TV with 

wet hands. Do not install this product near 

flammable objects such as gasoline or candles, 

or expose the TV to direct air conditioning.

 

Do not use high voltage electrical equipment 

near the TV (e.g., a bug zapper).  

This may result in product malfunction.

 

Do not expose to dripping or splashing and 

do not place objects filled with liquids, such as 

vases, cups, etc. on or over the apparatus (e.g., 

on shelves above the unit).

 

Grounding

 

(Except for devices which are not grounded.) 

Ensure that you connect the earth ground wire 

to prevent possible electric shock (i.e., a TV 

with a three-prong grounded AC plug must 

be connected to a three-prong grounded AC 

outlet). If grounding methods are not possible, 

have a qualified electrician install a separate 

circuit breaker. Do not try to ground the unit by 

connecting it to telephone wires, lightning rods, 

or gas pipes.

 

As long as this unit is connected to the AC wall 

outlet, it is not disconnected from the AC power 

source even if the unit is turned off.

 

Do not attempt to modify this product in any 

way without written authorization from LG 

Electronics. Unauthorized modification could 

void the user’s authority to operate this product.

 

Outdoor Antenna Grounding

 

(Can differ by country): 

If an outdoor antenna is installed, follow the 

precautions below. An outdoor antenna system 

should not be located in the vicinity of overhead 

power lines or other electric light or power 

circuits, or where it can come in contact with 

such power lines or circuits as death or serious 

injury can occur. Be sure the antenna system is 

grounded to provide some protection against 

voltage surges and built-up static charges. 

Section 810 of the National Electrical Code (NEC) 

in the U.S.A. provides information with respect 

to proper grounding of the mast and supporting 

structure, grounding of the lead-in wire to 

an antenna discharge unit, size of grounding 

conductors, location of antenna discharge 

unit, connection to grounding electrodes and 

requirements for the grounding electrode.

 

Antenna grounding according to the National 

Electrical Code, ANSI/NFPA 70

 

Moving

 

Make sure the product is turned off, unplugged, 

and all cables have been removed. It may take 2 

or more people to carry larger TVs. Do not press 

or put stress on the front panel of the TV.

 

Ventilation

 

Install your TV where there is proper ventilation. 

Do not install in a confined space such as a 

bookcase. Do not cover the product with cloth or 

other materials while plugged. Do not install in 

excessively dusty places.

 

Take care not to touch the ventilation openings. 

When watching the TV for a long period, the 

ventilation openings may become hot. This does 

not affect the performance of the product or 

cause defects in the product.

 

If you smell smoke or other odors coming from 

the TV, unplug the power cord and contact an 

authorized service center.

 

If water or another substance enters the 

product (like an AC adapter, power cord, or TV), 

disconnect the power cord and contact the 

service center immediately. Otherwise, this may 

result in fire or electric shock.

 

Do not install this product on a wall if it could be 

exposed to oil or oil mist. This may damage the 

product and cause it to fall.

 

Use only an authorized AC adapter and power 

cord approved by LG Electronics. Otherwise, this 

may result in fire, electric shock, malfunction, or 

product deformation.

Summary of Contents for OLED65W7P





















































Reviews: